Sylvox TV Installation Tips
Sylvox Outdoor TV Installation Tips: Advice for Best Performance
Warning- Please read before installation
1. Mounting Brackets are not supplied with the TV
2. Please thoroughly read the instructions before attempting installation The only suitable for the 43"-75"Outdoor TVs.
3. We advise that 2 people install the screen due to the heavy load of the screens.
4. Please be sure the mounting surface is strong enough to hold the weight of the screen.
Fixed Wall Mount
Fix the horizontal bracket into the wall with screws.
Step 1-Mounting Bracket to Wall
Step 2-Mounting bracket to the TV
Fix the vertical bracket on the back off with screws(M8).
Step 3-Mounting TVto Bracket
Attach TV with brackets on the wall.
1: Auto-brightness control sensor (1500cd/m^2: Series only)
Automatically adjust the screen brightness according to the ambient light.
2: REMOTE CONTROL SENSOR
3: POWER INDICATOR
Green: In power-on mode.
Red: In standby mode.
Sylvox Waterproof TV Installation Tips: Advice for Best Performance
Ensure that you get the correct viewing position when installing your mounting plate. Once you have
got the correct position check that there are no hazards around the area of installation, for example，
cables or pipes.
Please use Our Mounting plate TV sizes below to cut out a recess in the wall to fit into the wall
depending on what TV size you have.
Unscrew the plate at the back of the TV and connect all required wire connections from the wall，
through the square cable hole to the TV, then screw back the plate securely to ensure all the connected
wires are going through the square cabling hole are not pinched or broken.
Fix your mounting plate into place with the screws provided.
Once you have checked that the TV is functioning correctly and all cables are fitted, apply unbroken
a bead of silicone to the inside of the TV bezel at least 5 mm thick.
Please ensure the bezel is firmly sealed to the wall surface to complete the waterproof properties of
the installation. if it is not sealed correctly this will void your warranty.